Yes, it works. But you need the matching ribbon cable:
https://shop.runcam.com/lens-extension-cable-for-runcam-split-mini/
Connection way:
1. Open your Split 2 camera module:
2. Insert the matching ribbon cable to the connector of sensor board:
3. Press the other end of the cable into the connector on your Split 2S PCB:
4. Put a silicone piece on the sensor board, on the side which has the cable connector, as showed in below picture. You may cut the piece into suitable size.
5. Put sensor board carefully back into the camera case:
6. Put on the back door and lock it with the screws:
7. Don't forget to mount on the steel cover piece to fix the connection on the PCB.
Comments