When RunCam 6 doesn't work properly, please try flashing the firmware via computer when the card method doesn't work.
Please try the steps below to flash the firmware via computer, and please remove a microSD card and battery from the camera before flashing the firmware.
1.Install icatch drive to computer or laptop https://runcam.zendesk.com/attachments/token/vDErTSW4RgCokgRQ3DNHTxASA/?name=icatch_v3000_For_V37_V50_V35_V33_K33.7z
Download the attached runcam6-f.7z, and extract to get the download folder. (Find this at the last part of this article)
2. Keeping press the WiFi button of RunCam 6, use a USB-C cable to connect it to a computer.
Green light will be on at the power/shutter button, and the display screen will not be on at this time.
You can confirm a successful detection when seeing two icatch devices at Device Manager:
3. Go to the download folder from runcam6-f.7z, and click FRM.exe to proceed with flashing.
Please follow the options selected in the picture below, and then click ISP(F5) to start.
It will take about 2 to 3 minutes for the camera to finish the flashing.
Comments