I can’t find the sizes that I need like the placements of the mounting holes of the Swift. The size of the Swift is as below: Clair - October 09, 2018 14:58
Comments
This isn't correct for the runcam I got one amazon (2)
several resources show the main hole to adjustment hole distance as 9mm so the dimensions above do not add up with simple math:
a^2 + b^2 = c^2
7^2 + 4^2 = c^2
49 + 16 = c^2
65 = c^2
sqr(65) = c
c = 8.06mm
So if A and B are 7mm and 4mm then the hole distance is 8.06 so something is off.
Thanks to gail and James. The illustration has been updated:)